|
Benefits
|
In
Depth
|
Product
|
|
Ease of application
|
Simply wash surface clean to
remove all easily removable materials
|
Kalmatron®
KF-B
|
|
One Part Product
|
No Bonding Agents Needed
|
Kalmatron®
KF-B
|
|
Setting Time
|
15-45 minutes
|
Kalmatron®
KF-B
|
|
Final Hardening
|
3-4 hours
|
Kalmatron®
KF-B
|
|
“Heals” the cracked
concrete
|
Migrates into the old concrete
structure through the “capillary system”
|
Kalmatron®
KF-B
|
|
Strengthens cracked concrete
|
Even under hydraulic stress
|
Kalmatron®
KF-B
|
|
Protection against most
technical liquids
|
Protection is from both
negative and positive sides
|
Kalmatron®
KF-B
|
|
Freeze Thaw Resistance
|
Up to 200 cycles
|
Kalmatron®
KF-B
|
|
Reduces Shrinkage
|
As low as 0.007%
|
Kalmatron®
KF-B
|
|
Migrates into the old concrete
structure
|
Improves the underdeveloped
features of the concrete by changing the gel-crystalline
ratio.
|
Kalmatron®
KF-B
|
|
Porous penetration depth
|
Up to 9.6 inches
|
Kalmatron®
KF-B
|
|
Increases durability
|
Durability depends on mix
design
|
Kalmatron®
KF-B
|
|
Increases flexural strength
|
Up to 35% at 28 days
|
Kalmatron®
KF-B
|
|
Increases tensile strength
|
Up to 60%
|
|
|
Accidental Surface Removal
|
Main properties of protected
concrete are not changed after accidental surface removal of
the KF-B layer
|
Kalmatron®
KF-B
|
|
100% Impermeability
|
40 ATM; even with Hydraulic
Head Pressures 41 yards high
|
Kalmatron®
KF-B
|
|
Calcium Chloride Vapor
Emission Control
|
Does not allow any vapors to
penetrate and loosen glue for tile flooring
|
Kalmatron®
KF-B
|
|
Can be used in wet or adverse
weather
|
KF-B must be applied to a wet
surface
|
Kalmatron®
KF-B
|
|
Is cementitious, and will
therefore NOT be rejected by the concrete
|
Unlike Epoxy
|
Kalmatron®
KF-B
|
|
Application possible
throughout the year
|
Minimum temperature needed at
application = 23° F
|
Kalmatron®
KF-B
|
|
Placement Methods
|
Shotcrete, Full Depth Repair,
Overlays Horizontal Techniques, Hand Applied
|
Kalmatron®
KF-B
|